Impact Crusher Failure

Impact Crusher Failure

For the failure of equipment production, it is necessary to eliminate it in time and restore the performance of the equipment. This is also true for the impact crusher. The occurrence of the fault will delay the production process. In order to better eliminate the fault, here is our Introduce how to deal with common faults in the production of this machine.

For a professional manufacturer, we must not only manufacture superior products, but also provide comprehensive services. The mining equipment we produce has excellent performance, and we can provide any problems encountered in the production of the machine. Reasonable help, here is an analysis, we analyze several common problems encountered when the impact crusher is working.

Problem 1. The phenomenon of bearing heating. This phenomenon indicates that the bearing has a lack of oil and needs to be refueled in time. In addition, if there is more oil in the bearing of the impact crusher during production, there will be heat. Therefore, when refueling, be sure to pay attention to its oil level, add it according to the requirements, there is also a situation that the damage of the bearing of the equipment will also cause heat. At this time, it needs to be replaced in time to prevent production. A greater impact.

Problem 2: Abnormal vibration phenomenon, the reason for this phenomenon is more: the material particles are larger, need to check the feed size, and add materials according to the production demand of the impact crusher; caused by uneven wear, At this time, it is necessary to replace the worn parts; if the rotor is unbalanced, the rotor adjustment is needed at this time; if the foundation is improperly handled, the anchor bolts need to be inspected and reinforced at this time.

Problem 3: The phenomenon of belt reversal, this current cause has three main aspects: the belt wear caused by this, it needs to be replaced at this time; the belt assembly problem, this time need to adjust the pulley on the same plane; counterattack The quality of the triangle belt of the crusher is problematic, and to solve this problem, it is necessary to pay attention to the quality inspection when purchasing.

Problem 4: The finished product is large. The main causes of this phenomenon are three aspects: the hammer head wears. At this time, the treatment method is to adjust or replace the hammer of the impact crusher; the gap between the hammer and the counterattack Largely caused, this time to adjust the gap, generally adjusted to 15-20mm; too large feed size will also affect the discharge size, so you need to add materials according to the material input requirements.

The article mainly introduces the troubleshooting of the impact crusher, mainly the causes and solutions of several common faults when the machine is working. These introductions are mainly to help everyone better and faster. Failure in machine production, recovery period performance.

Get Price And Support

Simply complete the form below, click submit, you will get the price list and a ZENITH representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).