Black Powder Magnetic Separators

Black Powder Magnetic Separators

The black powder magnetic separator USES a variety of minerals instead of magnetic coefficients. The magnetic material is mixed and separated by magnetic force and mechanical force. The magnetic separation production line is one of the indispensable equipment. The magnetic separator produced by our company has novel structure, excellent performance and strong bearing capacity. According to the user's needs, we can provide a variety of strong magnetic downstream, semi-counter-current, counter-current type. Our magnetic separation equipment has simple structure, large capacity, simple operation and easy maintenance.

The black powder magnetic separator is a kind of efficient magnetic separation equipment, which can be used to remove iron and other general purpose machines. Black powder magnetic separator is widely used in mining, chemical, food industry, recycling, wood industry and other factories. Our magnetic magnetic system of magnetic separator is made of high quality ferrite material or composite rare earth magnet. The average magnetic induction of drum platform is 100-600mt. At present, due to the rapid development of technology, magnetic separator can be made into roll magnetic field strength, which can increase the current maximum measured magnetic field strength to 1645T. The commonly used separation dimensions of black powder magnetic separators are magnetite, ilmenite, iron roasting, pyrite, as well as mineral raw materials such as wolframite, manganese ore, kaolinite and rare earth minerals and screening.

Black Powder Magnetic Separators Works

After the ore slurry tank flows into the tank under the action of water to the mine water pipe, a loose state mineral particles enter the tank to the mine. The role of the magnetic field in the magnetic mineral particles magnetically together and form a "magnetic group" or "flux", "magnetic group" or "flux" in the pulp by the magnetic force to the magnetic pole movement, and is adsorbed on the cylinder . Since the polarity of the magnetic poles along the rotational direction of the cylinder are alternately arranged, and immobilized at work, "magnetic group" or "flux" when rotating with the drum, due to the magnetic poles of alternating magnetic stir phenomenon is generated, is mixed In the "magnetic group" or "flux" in the gangue minerals and other non-magnetic flip falling down, the final being sucked in the cylinder surface "magnetic group" or "flux" is the concentrate. Go to concentrate the magnetic system with the cylinder edge magnetic minima in unloading ore discharged flushing water under the action of water is discharged to the concentrate tank, if it is full magnetic magnetic roller, brush roll unloading ore is carried out. Non-magnetic or weakly magnetic minerals are left in the pulp slurry is discharged outside the tank with, that is tailings.

Black powder magnetic separators cylinder wear skin protection. Another black powder magnetic separators cylinder protective layer is a permanent magnet-type magnetic separator for the steel cylinder, is the most effective way to extend the tube skin, both wear life, and easy to replace. Wear-resistant rubber-coated, stainless steel plate, PU coating, PVC coating layer control experiments. Averages shown in Table 1 (data) of the result. Based on the test results were compared using PVC pipe wrapped leather coatings, adhesives, PVC-coated tube can significantly improve the lives of the skin.

Get Price And Support

Simply complete the form below, click submit, you will get the price list and a ZENITH representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).